Energy saving for fan and pump applications
VF-PS1
Dedicated functions for fan and pump.Bumpless transfer: switches operation smoothly between Local Mode and Remote Mode. Fire control mode: forcibly makes the motor keep operating at the preset speed in an emergency condition. Sleep mode: automatically stops operating at lower operating condition than the minimum limit. Improvement of energy saving effects.The VF-PS1 has the advanced energy-saving mode, which maximizes efficiency of the motors and increases fan and pump efficiency even at low speed. *The efficiency of induction motors is normally down at low speed. Simple set-up with Easy Key.The Easy Key provides quick access to up to 32 frequently-used parameters (Easy Mode). High frequency noise reduction, harmonic reduction.The built-in EMC filters and DC reactors reduct drastically high-frequency noise and harmonics, and improve power factor. |
Power Ratings
- Three phase 200 V at 0.4 to 90 kW
- Three phase 400 V at 0.75 to 630 kW
Frequency Range
- 0.01 to 500 Hz
Overload Rating
- 120% for 60 seconds
Degree of Protection
- IP20
Filter for Noise Reduction
- 200 V at 0.4 to 7.5 kW: Built-in EMC filter.
- 200 V at 11 kW and above: Optional.
- 400 V All models: Built-in EMC filter.
*The EMC filter complies with the European EMC Directive.
Reactor for Harmonic Reduction
- 200 V at 11 to 45 kW: Built-in DC reactor.
- 400 V at 18.5 to 75 kW: Built-in DC reactor.
- Other range: Optional
*The DC reactror meets IEC harmonic standards.
Communications
- Standard: RS485 (Modbus®RTU / TOSHIBA) Two-Wire / Four-Wire
- Optional: CC-Link®, DeviceNetTM, PROFIBUS®, LONWORKS®, BACnet®, Metasys®N2, APOGEE®FLN
Certifications
- CE, UL, CSA, SEMI F47
Applications (Motor Types: Induction motors)
- Fans and Pumps.