Ultra-compact and simple

VF-nC3

Easy operation.

The large setting dial in front allows you to control local speed and set the parameters easily. For setting parameters, just turn the dial and push it to select. The VF-nC3 can easily be operated with the on-board run and stop buttons.

Easy installation.

The VF-nC3 has vertically oriented main circuit terminal block, which makes wiring arrangement much easier. The multiple drives can be installed side-by-side for saving the installation space. The removable covers for the main circuit ensures safety.

Easy settings.

The Easy Key provides quick access to up to 24 frequently-used parameters (Easy Mode). The Easy Key allows to switch between Easy Mode and Standard Mode that shows all the parameters.

Power Ratings

  • Single phase 100 V at 0.1 to 0.75 kW
  • Single phase 200 V at 0.1 to 2.2 kW
  • Three phase 200 V at 0.1 to 3.7 kW

Frequency Range

  • 0.1 to 400 Hz

Overload Rating

  • 150% for 60 seconds

Degree of Protection

  • IP20

Filter for Noise Reduction

  • Single phase 200 V All models: Built-in EMC filter.

*The EMC filter complies with the European EMC Directive.

Communications

  • Standard: RS485 (Modbus®RTU / TOSHIBA) Two-Wire

Certifications

  • CE, UL, CSA

California proposition 65

WARNING: This product can expose you to chemicals including:

Substance 1: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

Substance 2: Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm.

For more information, please see https://www.p65warnings.ca.gov/New Window

Applications (Motor Types: Induction motors)

  • Food processing machinery, Packaging machinery, Conveyors, Fans, Pumps, Health & Medical equipment, etc.