Single-phase Input Voltage:
Standard executions 50Hz 220-230V; 60Hz 110-115V.
||2 poles: 3000 rpm – 50Hz
||3600 rpm – 60Hz
Continuous duty at the maximum centrifugal force (S1), with the possibility to adjust the force from 0 to 100% following the specific graded plate on the eccentric weights.
Mechanical Protection-Impacts Protection
Electric motor realized with low loss silicium magnetic lamination core, allowing to increase the efficiency while reducing heating up.
F standard, H on request.
Windings impregnation realized with ASTM system, with polyester resin class H.
From -20°C to +40°C (-4°F/104°F).
lectric motor protected by thermistor (PTC set at 130°C) as standard from size 50 (available on request on smaller sizes).
Shafts in NiCrMo steel, heat treated.
Mechanical structure designed to withstand the high stresses, realized in cast iron (starting from size 03) or in high resistance aluminum (up to size 02)
Electrostatic powder painting, epoxy-polyester, polymerized in oven. Color: Blue RAL 5010
Bearings and Lubrication
High load capacity bearings, in special executions to withstand the stresses of high centrifugal forces and vibrations, with special “Long-Life” grease lubrication. Labyrinth type bearing seal for grease, with wide restraining chamber.
Available on request
Stainless steel weight covers
Special fixing holes configurations